Anchovy Drying Using Infrared Radiation
- 1 Department of Mechanical Engineering, Faculty of Engineering, Burapha University, Thailand
- 2 Department of Mechanical Engineering, Faculty of Engineering, Ubon Ratchathani University, Thailand
Abstract
The present study investigated the drying of anchovy using infrared radiation experimentally; in addition, the dimensionless heat transfer coefficient in terms of Nusselt’s number was also investigated. The anchovy was dried from 78±1%wb down to 20±1%wb. The drying conditions were infrared power range 400-800 W, hot air temperatures range 50-70°C and hot air velocity range 0.5-1.5 ms-1. The lowest drying time to reduce the moisture content was found at an air temperature of 70°C and velocity of 1.5 ms-1. Drying took 446, 390 and 223 min at 400, 600 and 800 W of infrared power, respectively. The increase in drying temperature, hot air velocity and infrared power were significant factors for decreasing the moisture and darkness of dried anchovy. The modified correlations of Nusselt’s number for the anchovy drying could fit the experimental data quite well within ±10% deviation.
DOI: https://doi.org/10.3844/ajassp.2013.353.360
Copyright: © 2013 Watcharin Dongbang and Anirut Matthujak. This is an open access article distributed under the terms of the
Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.
- 2,990 Views
- 3,767 Downloads
- 19 Citations
Download
Keywords
- Anchovy
- Drying Kinetics
- Infrared Radiation
- Nusselt’s Number